Go to content

Solar Racking and Mounting
goldline


A leading producer of innovative light  metal products, Schletter develops and produces state-of-the-art solar  mounting systems and sustainable products from aluminium and high-grade  steel. The company is constantly evolving and has become a recognized  supplier of products in the areas of solar technology. Their versatile and extensive production capability gives them the scope to provide solutions for an extensive range of installation and site challenges.



  

  
goldline
RAIL4200-SL



Schletter # 120005-04200
Solo Light rail 4200mm long
Top: Klick Groove M8
Bottom: Screw Channel M10

RAILJOIN-SL



Schletter # 129002-002
Rail Joiner for Solo Light rail
RAILENDCAP-SL


Schletter # 129011-000
Rail End Cap for Solo Light rail

CLAMP-E30-40
CLAMP-E40-50


Schletter # 131101-001
Schletter # 131101-002
End clamps
To suit 30-40mm and 40-50mm modules
Quick mounting via 8mm Klick Channel and with Integrated Grounding Pin
Must be installed a minimum of 10mm from the end of the rail
TORX T-40 bit required
CLAMP-M30-40
CLAMP-M40-50


Schletter # 131121-001
Schletter # 131121-002
Mid clamps
To suit 30-40mm and 40-50mm modules
Quick mounting via 8mm Klick Channel and with Integrated Grounding Pins
Allow 25mm between modules when working out total length of rail
TORX T-40 bit required
GROUNDCLAMP


Schletter # 135003-002
Grounding/Lightning Clamp
1 needed per rail span
L-FOOT-R2


Schletter # 119026-101
L Foot with Rapid 2+ rail support
Screws NOT included
Use SCREW-STEEL864
or
SCREW-WOOD880 + SEAL-EPDM8
CORRFOOT-KT


Schletter # 111013-333
Mounting for corrugated roofing
Includes KlickTop for easy rail mounting
Screws NOT included
Must attach to purlin or rafter with
2 x SCREW-WOOD880 + 2 x SEAL-EPDM8
or
4 x SCREW-STEEL864
CORRFOOT-R2


Schletter # 111013-444
Mounting for corrugated roofing
Includes Rapid 2+ for easy rail mounting
Allows for uneven roof adjustment
Can be used for Horizontal and Vertical rail configurations
Screws NOT included
Must attach to purlin or rafter with
2 x SCREW-WOOD880 + 2 x SEAL-EPDM8
or
4 x SCREW-STEEL864
HANGBOLT-KT10200


Schletter # 111110-200
Hanger Bolt Kit with Klick Top Connector
Kit includes:
Hanger Bolt M10 x 200mm, Aluminium KlickTop, EPDM Seal and 3 x Flange Nuts
For WOODEN purlins/rafters only
KLICKTOP-KIT



Schletter # 129004-000
Klicktop Cross Connector Kit
Includes:
KlickTop attachment with M8 bolt and toothed washer, M8 square nut and Klickin Click for M8 nut


TRAPFOOT




Schletter # 113009-103
Single Fix Trapizoidal kit
Kit includes:
2 x single fix vario solo fasteners and 4 x self-tapping screws with seals
For steel sheet 0.5mm +
and aluminium 0.8mm +



SEAMCLAMP-KT


Schletter # 112012-004
Seam Clamp with KlickTop

SEAMCLAMP-CH


Schletter # 112001-001
Seam Clamp with Klick Channel top
TILTKIT30




Schletter # 150101-150
Tilt kit to give approx 30° tilt
Add this to the pitch of your roof to get total angle from horizontal
For solar modules in PORTRAIT mode only
Requires these additional products:
KLICKTOP-KIT Cross Connectors to attach module support rails to top
HANGBOLT-KT10200 to attach base to wooden purlins


HEXBOLT820



Schletter # 943308-120
Hexagon Socket Bolt M8 x 20mm
c/w toothed washer
Use with NUT-SQ8
and NUT-HOLDER8



HEXBOLT1025



Schletter # 943610-025
Hexagon Head Bolt M10 x 25mm
Use with NUT-FLANGE10


SCREW-STEEL864




Schletter # 943718-064
Steel screw with washer
for steel ≥ 1.5mm thick


SCREW-WOOD880



Schletter # 943208-080
Galvanized wafer head wood screw M8 x 80mm
Use with SEAL-EPDM8
SCREW-STEEL5.525


Schletter # 943000-700
Fastener for steel
M5.5 x 25mm Self-Tapping
NUT-SQ8



Schletter # 943914-08
Square Nut M8
Use with HEXBOLT820 and NUT-HOLDER8 to secure in the rail

NUT-FLANGE10



Schletter # 943912-010
M10 serrated steel flange nut with anti-twist device
Use with HEXBOLT1025
NUT-HOLDER8



Schletter # 129010-008
Klickin Click for HEXBOLT820
Use with NUT-SQ8 square nut in rail
SEAL-EPDM8




Schletter # 119016-000
EPDM seal for SCREW-WOOD880

EPDMROLL48X10



Schletter # 973000-014
EPDM RUBBER ROLL
10m x 48mm
Use to to seal and insulate rails etc. from roofing material etc.
CABLECLIP-SL




Schletter # 129065-000
To suit Solo Light Rail RAIL4200-SL
UV Rated and Temperature Resistant
Takes up to 6 x 6mm2 cables



Please contact us for more assistance with our Schletter range of solar mounting hardware.

Click here to download the current Schletter product catalogue for a comprehensive description of all of their solar mounting products.
goldline
Back to content