Go to content

Charge Controllers - MPPT
goldline


MPPT CHARGE CONTROLLERS



The original maximum power point tracking (MPPT) charge controller, the FLEXmax, increases PV array yield by up to 30% compared to non-MPPT controllers. FLEXmax charge controllers can operate at their maximum rated current in ambient temperatures up to 40 °C and can be used with battery systems from 12 to 60 VDC with PV open-circuit voltage as high as 300 VDC (FM100 model). The controller’s set points are fully adjustable to allow use with a variety of battery types and charging profiles.

FLEXmax™ 60

FLEXmax™ 80



The OutBack FLEXmax Maximum Power Point Tracking Charge Controllers offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging.


The Charge Controller features include:-

  • 80 amps maximum continuous output current up to 40°C without thermal derating for the FLEXmax 80, and 60 amps for the FLEXmax 60

  • Engineered to work with 12, 24, 36, 48, and 60VDC battery voltages

  • Backlit LCD display screen with 80 characters (4 lines, 20 characters per line)

  • Last 128 days of operational data are logged for review

  • Voltage step-down capability allowing a higher PV array voltage configuration

  • Manual and auto-equalise cycle


FLEXmax™ 100:
AS/NZS5033:2014 / IEC62109-1 compliant


The OutBack FLEXmax 100 offers increased output for larger solar arrays. 300VDC open-circuit voltage means longer solar module strings to minimise balance of system components. Each Charge Controller allows customized battery recharging.

The Charge Controller features include:-

100 amps maximum continuous output current up to 40°C without thermal derating
Engineered to work with 24, 36, and 48 VDC battery voltages
Backlit LCD display screen with 80 characters (4 lines, 20 characters per line)
Last 128 days of operational data are logged for review
Voltage step-down capability allowing a higher PV array voltage configuration
Manual and auto-equalise cycle
Mate3s required to use the smart programming wizards

Brochure
goldline
goldline
Back to content