IPNZ logo
 09 415 6686
09 415 6686
Go to content
Products > Charge Controllers > PWM

Charge Controllers - PWM
goldline




PWM CHARGE CONTROLLERS


Traditional solar regulators featuring PWM charging (pulse width modulation), operate by connecting the solar array directly to the battery bank. When the array is connected directly to the battery bank, the array output voltage is ‘pulled down’ to the battery voltage. This occurs because the batteries are a very large load for the limited current sourcing capability of a solar array.

The BRAT
30 amp as Controller without Load Control
20 amp as Controller with Load Control



  • Up to 60 Vdc Input Voltage

  • 12 or 24Vdc Battery Voltage

  • Bulk, Absorb, Float and Equalisation

  • Battery Temperature Compensation

  • Four LED's for Bulk, Float, Load On and Battery Low Voltage Disconnect

  • Lighting Control - 16 position rotary switch

  • Outdoor Weatherproof IP55 enclosure



Brochure

Manual

goldline
Independent Power NZ Ltd
32e William Pickering Drive
Rosedale
AUCKLAND 0632

Ph: +64 9 415 6686
Fx: +64 9 415 6685
Back to content