Go to content

Wind Turbines - AC & DC Overcurrent Protection
goldline



                       MidNite Clipper



The MidNite Clipper was designed to work in conjunction with the MidNite Classic MPPT Controller to give safe, reliable control pf your wind or hydro turbine while also giving you true three stage battery charging.


The combination of the Clipper and the Classic has proven to increase daily harvest up to 250% as well as peak power by 300% on some turbines.


  • 3 Stage Charging
  • Reduces wear and tear on the turbine
  • Reduces noise from turbine with controllable noise level
  • AC and DC models from 1500 to 4000 watts

goldline
MNCLIP4KAC

MidNite Solar Clipper AC over Current Protection for Wind/Hydro applications.

The AC  Clipper is designed to work with AC turbines and was designed for 3 to 4 kw turbines.The AC Clipper comes standard with 1.6 ohms of resistance per phase. Custom resistance values can be provided upon request and is carried out by an easy to change resistor insert  for the Clipper allowing changes in the field.

The 4,000 watt AC Clipper comes in several different resistance values.  The standard values available are 0.4, 1.0, 1.6 and 4.0 ohms per phase.

MNCLIP4KDC

MidNite Solar Clipper AC over Current Protection for Wind/Hydro applications.

The AC  Clipper is designed to work with AC turbines and was designed for 3 to 4 kw turbines.The AC Clipper comes standard with 1.6 ohms of resistance per phase. Custom resistance values can be provided upon request and is carried out by an easy to change resistor insert  for the Clipper allowing changes in the field.

The 4,000 watt AC Clipper comes in several different resistance values. The standard values available are 0.4, 1.0, 1.6 and 4.0 ohms per phase.

MNCLIP1.5KAC

MidNite Solar Clipper AC over Current Protection for Wind/Hydro applications.

The AC  Clipper is designed to work with AC turbines and was designed for up to 1.5kw maximum turbines. The 1.5K AC Clipper comes standard with 2 ohms of resistance per phase. Custom resistance values can be provided upon request and is carried out by and easy to change resistor insert  for the Clipper allowing changes in the field.

The AC Clipper contains two 277 VAC 50 Amp 3 phase AC breakers (one for a stop switch) and a 1200 volt 200 Amp 3 phase bridge rectifier.


goldline
Back to content